有沒有人可以幫我看一下,為什麼會這樣.......
從 AUTOCAD PLOT 出來的 EPS 檔案放到不同軟體後的結果,
這個是放到 CORELDRAW 9.0 會變成反白
<img src="http://taiwanese.hypermart.net/thn/thn_0051_1.JPG">
這個是放到 InDesign 2.0 會自己旋轉 90 度
<img src="http://taiwanese.hypermart.net/thn/thn_0051_2.JPG">
這個是放到 PHOTOSHOP 7.0,也是會自己旋轉 90 度,
我得自行將 PLACE 進來的 EPS 檔案旋轉
<img src="http://taiwanese.hypermart.net/thn/thn_0051_3.JPG">
我是很想用 CORELDRAW 來排版,
但是很奇怪的..........那郭 EPS 檔案會自動反白......
有人知道原因嗎?
[問題]如何將DWG或DXF轉到coreldraw去排版而不跑掉比例?
圖會自動轉90度 我也發生過爆漿撒尿牛丸 寫: 有沒有人可以幫我看一下,為什麼會這樣.......
從 AUTOCAD PLOT 出來的 EPS 檔案放到不同軟體後的結果,
我是很想用 CORELDRAW 來排版,
但是很奇怪的..........那郭 EPS 檔案會自動反白......
有人知道原因嗎?
那是跟你當選擇的autocad紙張方向有關
試試看換另個方向的紙張 應該就不會有這問題發生了
(我也忘記到底是要選直向還是橫向)
反白的問題......這我也不清楚
illustrator沒這問題
為何不用illustrator排呢?
是因為沒有頁數功能的緣故嗎?
再不然就放到photoshop反白吧
讚讚讚!
我剛剛就照 shadow 講的方法在 AUTOCAD 裡頭把圖輸出成 600DPI 的 EPS 檔,
然後在 PHOTOSHOP 裡頭打開,
LINEWEIGHT 很漂亮,
連 0.05 mm 的都可以用一般的印表機印出來。
只是這個設定 DPT 的地方不大好找,
我花了一點時間才找到,
拉下選單選Plot
找到 Plotter COnfiguration 裡頭的 Post Script Level2.pc3,
在右邊點選 Properties,
找到 Graphics 裡頭有個 Graphics Vectors,
可以看到下面有個可以調 DPI 的 Res:300x300DPT 拉條,
就是那裡嘍!
我剛剛就照 shadow 講的方法在 AUTOCAD 裡頭把圖輸出成 600DPI 的 EPS 檔,
然後在 PHOTOSHOP 裡頭打開,
LINEWEIGHT 很漂亮,
連 0.05 mm 的都可以用一般的印表機印出來。
只是這個設定 DPT 的地方不大好找,
我花了一點時間才找到,
拉下選單選Plot
找到 Plotter COnfiguration 裡頭的 Post Script Level2.pc3,
在右邊點選 Properties,
找到 Graphics 裡頭有個 Graphics Vectors,
可以看到下面有個可以調 DPI 的 Res:300x300DPT 拉條,
就是那裡嘍!
我試了一下,CorelDRAW 10可以匯入dwg檔案,不過沒有封閉的雲型曲線會走樣,變成由"直線"組成的曲線....但好處是圖層會保留...老王 寫: 輸出成PLT好像只有CorelDRAW 9可以,CorelDRAW 10可以直接匯入DWG檔,不過要先炸開,不然會哩哩落落...
CorelDRAW 9可以匯入plt檔案,線條完全不會走樣,不過圖層就沒有了.... :s
至於eps檔案在9.0裡會反白,但是在10.0就不會了..不過........
為什麼我不管把dpi調到多高,匯入CorelDRAW裡都是鋸尺狀很嚴重的難看圖形
但是在photoshop裡線條就很漂亮???不解..... :s
Thx for everyone...
i was just using that print screen method ....transfer CAD drawing to PS
and of course the result...*yuck...*....
thx for everyone...!!
i though photoshop is just the same as coral draw...but indeed, they are not...
can anyone tell me, what's the different between them.....
many thx
i was just using that print screen method ....transfer CAD drawing to PS
and of course the result...*yuck...*....
thx for everyone...!!
i though photoshop is just the same as coral draw...but indeed, they are not...
can anyone tell me, what's the different between them.....
many thx
一個是以向量(vector-based)為主的編輯器Anonymous 寫: Thx for everyone...
i was just using that print screen method ....transfer CAD drawing to PS
and of course the result...*yuck...*....
thx for everyone...!!
i though photoshop is just the same as coral draw...but indeed, they are not...
can anyone tell me, what's the different between them.....
many thx
一個是以點陣(raster image)為主的編輯器